Martin D-41 弦距太高 請高手解救~

Discussion in '吉他' started by RE., Jan 28, 2013.

  1. RE.

    RE. Member

    Joined:
    Jan 5, 2006
    Messages:
    211
    Likes Received:
    0
    各位前輩好~
    小弟有一把 Martin D-41 弦距超高 彈奏不易
    請問有哪位前輩可出手相救的? 或是哪有較好的調教師傅? (國揚老師不考慮喔~)
    多謝!!~
     
    RE., Jan 28, 2013
    #1
  2. joesage

    joesage New Member

    Joined:
    Feb 7, 2006
    Messages:
    21
    Likes Received:
    0
    吉他弦架在上弦枕跟下弦枕的nut上面 ,邏輯上來說要放低就是把這兩個變低 ,你的琴很好 ,通常不需要動到上弦枕,所以建議你:
    1.調脖子,將上弦診的高度放低 ,
    2. 磨nut(下弦枕) ,要記得不要磨太多,先算好你要的高度就可以
    我以前有磨過,跟朋有兩個人磨到手要斷掉,買最粗的砂紙還是這樣,不過磨過後弦的起點高度就變低 ,當然也整個弦距變低,我猜這可能是你要的,你可以試試看囉,有問題再說.

    PS; 你的琴很屌耶 哈
     
    joesage, Jan 31, 2013
    #2
  3. ufxd2008

    ufxd2008 Member

    Joined:
    Apr 25, 2006
    Messages:
    444
    Likes Received:
    4

    蘇利工作室或阿鬼。卡比木吉他方面也ok
    通常新琴買來，台灣潮濕面板會突起，蘇利那邊有特殊方法改善。
    磨下弦枕也可以
     
    Last edited: Feb 1, 2013
    ufxd2008, Feb 1, 2013
    #3
  4. garage1147

    garage1147 Member

    Joined:
    Jul 11, 2011
    Messages:
    139
    Likes Received:
    0
    感謝樓上大哥提共寶貴資訊，
    我也正在尋找改善面板浮起的師父。

    另外我聽說martin弦距調低聲音會變，
    （好像會變沒那麼好聽）
    我也是拿D41(1990年的老琴)
    我沒試過，但我想是張力改變的關係吧？
     
    garage1147, Feb 2, 2013
    #4
  5. ufxd2008

    ufxd2008 Member

    Joined:
    Apr 25, 2006
    Messages:
    444
    Likes Received:
    4

    應該是還好，看你手感和tone決擇。martin其實蠻
    容易出問題的.不過都小事情啦。你在跟他們討論
     
    ufxd2008, Feb 2, 2013
    #5
  6. Darren

    Darren Member

    Joined:
    Oct 25, 2001
    Messages:
    74
    Likes Received:
    0
    小弟有把十幾年的 Adamas II, 也是面板突起, 弦距變很高
    好幾年前問過相關老師, 都說無法處理
    請問有蘇利老師的聯絡方式嗎?
    Thanks~
     
    Last edited: Feb 8, 2013
    Darren, Feb 8, 2013
    #6
  7. y2k8520

    y2k8520 Member

    Joined:
    Aug 16, 2006
    Messages:
    111
    Likes Received:
    0
    阿鬼不推薦。 個人建議。
     
    y2k8520, Feb 10, 2013
    #7
  8. chou0630

    chou0630 Member

    Joined:
    May 28, 2011
    Messages:
    205
    Likes Received:
    0
    敢問樓上是有什麼不好的經驗嗎
     
    chou0630, Feb 10, 2013
    #8

Share This Page