請教各位前輩...關於音箱頭同時接兩個Cab..

Discussion in '效果器、Amp、DIY' started by haroldkao, Jul 9, 2013.

  1. haroldkao

    haroldkao New Member

    Joined:
    Apr 8, 2005
    Messages:
    11
    Likes Received:
    0
    請教各位前輩...
    最近多出一個8ohm 112 Cab..
    於是把它同時接上Mesa Boogie Mark III的另一組8ohm的輸出..
    (原本的 Boogie 8ohm 112 Cab 也接著)
    本來想說應該會更飽滿..
    結果反而兩個cab音質都變的很遠..很悶..
    單獨接其中任何一個Cab..都很正常...

    是否haed沒有人這樣在接的?...還是這顆head已經有故障了...?

    感謝解答..
     
    haroldkao, Jul 9, 2013
    #1
  2. lymisme

    lymisme Active Member

    Joined:
    Feb 1, 2006
    Messages:
    874
    Likes Received:
    37
    你可能接錯了
    兩棵8 ohm speaker要接到16(speaker串聯) or 4 ohm(speaker並聯) speaker output


     
    lymisme, Jul 9, 2013
    #2
  3. haroldkao

    haroldkao New Member

    Joined:
    Apr 8, 2005
    Messages:
    11
    Likes Received:
    0
    自己搞了一陣子...問題終於解決了...

    發現其實...兩個8ohm並聯成4ohm...
    不管接8 or 4 ohm...聲音聽起來差不多...(當然接4比較好)

    之前的狀況...後來發現是後級管老化的問題...
    換了全新的後級管就正常了...
     
    haroldkao, Jul 20, 2013
    #3

Share This Page