請問一下FENDER Fender®/Gotoh® Vintage Style Tuning Machines該如何換弦

Discussion in '吉他' started by yenwun, Feb 23, 2010.

  1. yenwun

    yenwun Member

    Joined:
    Jul 25, 2005
    Messages:
    75
    Likes Received:
    2
    請問一下各位好心的同學~~
    FENDER Fender®/Gotoh® Vintage Style Tuning Machines該如何換弦

    就是復古型的弦鈕~~我自己換弦一直都失敗~~


    上次在涵美請四哥換弦有特別請教過他~~
    當場有聽懂~~但是時間一隔久~~又給他換不起來~~

    旋轉弦鈕時，到一個程度弦都會彈開~~(這樣形容可以理解嗎?)

    是否有人可以教一下或有youtube教學影片可以分享~~

    謝謝~~

    [​IMG]
     
    Last edited: Feb 23, 2010
    yenwun, Feb 23, 2010
    #1
  2. joe.p

    joe.p Member

    Joined:
    Nov 14, 2002
    Messages:
    143
    Likes Received:
    1
    綁弦的地方有個洞

    這種VINTAGE 的弦鈕
    你需要把弦的長度先剪到剛好長
    穿過搖座後
    拉到琴頭
    綁弦的地方頭頂有個洞
    把弦給它戳下去
    再順著那一痕溝拉緊
    順順的轉
    就OK啦^^
    好像藏寶圖....@@
     
    joe.p, Feb 23, 2010
    #2
  3. rockheart

    rockheart Member

    Joined:
    May 4, 2009
    Messages:
    445
    Likes Received:
    4
    拉長弦 到 弦鈕位置留個15公分左右吧

    先轉個幾圈後，右手把弦壓在琴頭上，就不會彈開了
    左手轉弦鈕
     
    rockheart, Feb 23, 2010
    #3
  4. yenwun

    yenwun Member

    Joined:
    Jul 25, 2005
    Messages:
    75
    Likes Received:
    2
    感謝回應~~

    感謝回應~~我再找時間試試看~~謝謝
     
    yenwun, Feb 23, 2010
    #4
  5. JAMMY

    JAMMY Member

    Joined:
    Apr 13, 2002
    Messages:
    696
    Likes Received:
    0
    這種換弦最好長度留長!

    然後戳下去後順溝槽以90度拉緊後, 先別轉弦鈕!
    直接用右手拉緊弦順時針繞個幾圈,大約兩~三圈! 繞到弦沒有空間了!(手不可放開弦不然會彈開)

    剩下再轉弦鈕將弦轉緊即可!

    至於要如何量弦的長度! 以弦鈕位置為準! 先將弦稍拉著! 用拳頭將弦撐鬆 (拳頭在指板和弦中間)起碼一個拳頭寬(不能太緊也不能太鬆)!

    這樣繞起弦都會在標準3圈左右!
     
    JAMMY, Feb 23, 2010
    #5
  6. 惡魔香腸

    惡魔香腸 Active Member

    Joined:
    Aug 13, 2005
    Messages:
    1,229
    Likes Received:
    2
    要換第六弦的話

    就把弦 剪到跟第二弦的弦鈕一樣長

    這樣可以了解嗎 ???
     
    惡魔香腸, Feb 24, 2010
    #6

Share This Page