想請教各位一些POD HD PRO的問題 希望有朋友能一起討論 1.在4/1 OUTPUT可切LINE 跟 AMP,請問若我接後級,應該切到哪一邊呢?(目前是接LINE到後級) 若我遇到COMBO是不是就該切換成AMP? 並且將AMP模擬以及ACB模擬都關掉!? 2.為何我的螢幕左上角.都會有個 * 的符號出現?? 3.AMP模擬的編輯 雙按ENTER後可以進入AMP的編輯模式 第2頁中的"SAG"跟"HUM" and AC ripple 請問是幹嘛用的....(預設都在50%) 第3頁的bias 跟bias excursion 又是幹嘛的?...(預設也都在50%) 這些是目前遇到的問題 希望有前輩能為我解答! 謝謝!
SAG HUM ....那些是POWER AMP模擬的效果 我只記得hum 是電流聲的樣子 你上官網下載說明書 裡面會寫的很詳細, 英文不好就是丟到翻譯機上 因為我也是這樣看~"~ HD系列設計進POWER AMP 和RETURN的聲音才會比較對 如果都沒有的話 你就直接LINE IN MIXER會比進音箱來的優!!
有下載說明書阿....但是對我來說有講跟沒講一樣= = 哈哈哈 今天沒吉他可以試...在試試看改變參數會有啥影響 我家中也有cab跟mixer 其實我覺得cab模擬做的很不錯耶 我接上後級跟cab 把cab模擬關掉!也挺不錯的 請問版大用哪台?一樣嘛? 請問螢幕的*字號試幹嘛的???
Power Amp parameters Tone Early Reflections (E.R.) control-This option adds the amount of reflective “room tone” that is mixed with your Amp tone. This value is saved per Preset. 簡單講應該就是增加空間感 和reverb不同,指的應該是像實際收音的那種空間感 Sag-Setting the Sag to minimum offers a “tighter” responsiveness, and turning clockwise provides more “touch” dynamics & sustain. “tighter” →指的是緊縮,這項可以調TONE的紮實度 Hum-Controls how much heater hum & AC ripple interacts with your tone. At the maximum setting things get really freaky. 這就是調電流聲吧!!只是我用到現在其實還聽不太出來多大的差異~"~ 我耳朵爛 Presence-Just as with the Presence knob found on the front panel of most tube amplifiers, this brightens up your tone at higher settings 跟音箱上的一樣,簡單的來說他會把吉他的聲音往前推 Bias-Changes the Bias of the power tubes. Set to minimum to achieve a very “cold” Class AB biasing. At maximum the amp is operating in Class A. 這調的是管子會影響聲音溫潤度 Bias Excursion-Knob 2: The Bias Excursion determines how the power amp tubes’ voicing reacts when they are pushed hard. Set low for a tighter feel. Set high for more tube compression. This parameter is highly reactive with the DRIVE & MASTER settings. 這像和MASTER還有DRIVER的調整會有很大的差異,開少會有緊實的感覺,開多壓縮感會越多,是調整管子做反應的方式。 我的是HD300大部份軟件內容應該和 HD PRO 一樣, 有*出現是因為你有調整過,尚未儲存的意思,我不知道這點是不是和HD300一樣 我英文不好所以也把原文PO出來,中文部份很多是我自己的話語